loading
The compression machines are usually referred to as compression presses which is hydraulic driven. Machine is vertically sitting on the floor with straight lock up system. The lower half mould sitting stationed to the machine clamping plate while the upper half moves all the time. The mould closed with top force coming from machine, pressure is applied to force the material into contact with all the mould area while heat and pressure are maintained until the moulding material has cured; when time is up, the mould open, part being ejected or removed.
The compression machines are usually referred to as compression presses which is hydraulic driven. Machine is vertically sitting on the floor with straight lock up system. The lower half mould sitting stationed to the machine clamping plate while the upper half moves all the time. The mould closed with top force coming from machine, pressure is applied to force the material into contact with all the mould area while heat and pressure are maintained until the moulding material has cured; when time is up, the mould open, part being ejected or removed.
| Mold type | Compression mould, SMC MOULD |
| Cavity and core steel | 1.2738 (28-32HRC) |
| Slider/lifter/cams | 1.2344 (H13) |
| Cavity/imprint | 1 |
| Ejection system | Ejector pins, ejector plates driven by hydralic cylinders |
| Heating system | Oil heating system /steam and electrical are optional |
| Mold finish | Technical polishing grain 400 + chrome plating |
| Vacuum system | Included |
| IMC system | included |
| Cycle time | 4 minutes |
| Mold life | 500000 shots |
| Mold type | Serial mold |
| Our Serive | MDF report / mold flow analysis |
| Weekly process report with photos | |
| Quality control team following project | |
| Trial report with video and free samples | |
| Sample and mould dimension report | |
| Optional service | bulk production |
| primer, top coating | |
| assembling & packing |
| Mold type | Compression mould, SMC MOULD |
| Cavity and core steel | 1.2738 (28-32HRC) |
| Slider/lifter/cams | 1.2344 (H13) |
| Cavity/imprint | 1 |
| Ejection system | Ejector pins, ejector plates driven by hydralic cylinders |
| Heating system | Oil heating system /steam and electrical are optional |
| Mold finish | Technical polishing grain 400 + chrome plating |
| Vacuum system | Included |
| IMC system | included |
| Cycle time | 4 minutes |
| Mold life | 500000 shots |
| Mold type | Serial mold |
| Our Serive | MDF report / mold flow analysis |
| Weekly process report with photos | |
| Quality control team following project | |
| Trial report with video and free samples | |
| Sample and mould dimension report | |
| Optional service | bulk production |
| primer, top coating | |
| assembling & packing |
