loading
| Product Name | Reinforcement beam mould |
| Mold type | Compression mould , GMT MOULD |
| Cavity and core steel | 2311 (28-32HRC) |
| Slider/lifter/cams | 1.2344 (H13) |
| Cavity/imprint | 1 |
| Ejection system | Ejector pins, ejector plates driven by hydralic cylinders |
| Heating system | Oil heating system /steam and electrical are optional |
| Mold finish | Technical polishing grain 400 + chrome plating |
| Vacuum system | N/A |
| IMC system | N/A |
| Cycle time | 3 minutes |
| Mold life | 300000 shots |
| Mold type | Serial mold |
| Our Serive | MDF report / mold flow analysis |
| Weekly process report with photos | |
| Quality control team following project | |
| Trial report with video and free samples | |
| Sample and mould dimension report | |
| Optional service | bulk production |
| primer, top coating | |
| assembling & packing |
| Product Name | Reinforcement beam mould |
| Mold type | Compression mould , GMT MOULD |
| Cavity and core steel | 2311 (28-32HRC) |
| Slider/lifter/cams | 1.2344 (H13) |
| Cavity/imprint | 1 |
| Ejection system | Ejector pins, ejector plates driven by hydralic cylinders |
| Heating system | Oil heating system /steam and electrical are optional |
| Mold finish | Technical polishing grain 400 + chrome plating |
| Vacuum system | N/A |
| IMC system | N/A |
| Cycle time | 3 minutes |
| Mold life | 300000 shots |
| Mold type | Serial mold |
| Our Serive | MDF report / mold flow analysis |
| Weekly process report with photos | |
| Quality control team following project | |
| Trial report with video and free samples | |
| Sample and mould dimension report | |
| Optional service | bulk production |
| primer, top coating | |
| assembling & packing |
The GMT composite material has good dimensional stability and good impact resistance, so it is also used in logistics field, such as tray, pallet. GMT pallet can resist the higher temperature and its load capacity is also more than regular injection molded pallets.
The GMT composite material has good dimensional stability and good impact resistance, so it is also used in logistics field, such as tray, pallet. GMT pallet can resist the higher temperature and its load capacity is also more than regular injection molded pallets.
